The Tango line of materials are the absolute best method for creating "rubber like" parts in 1 to 3 days.
TangoPlus (27A) is a clear "silicone rubber like" material with an unmatched elongation tear @ 218%. Created with the PolyJet process, TangoPlus is perfect for living hinges, tubes, gaskets, soft touch buttons, skin, overmolds and more.
TangoBlack (61A) creates a "rubber like" material with a decent elongation tear @ 47.7%. Perfect for tubes, gaskets, soft touch buttons, tread, dampeners, cartilage, overmolds and more.
TangoGray (75A) creates a "rubber like" material with a decent elongation tear @ 47%. Perfect for tubes, gaskets, soft touch buttons, treads, dampeners, cartilage, overmolds and more.
|Tensile Strength (Plus)||D-412||-||211 PSI|
|Tensile Strength (Black)||D-412||-||290 PSI|
|Tensile Strength (Gray)||D-412||-||632 PSI|
|Elongation at Break (%) (Plus)||D-412||218%||218%|
|Elongation at Break (%) (Black)||D-412||47.7%||47.7%|
|Elongation at Break (%) (Gray)||D-412||47%||47%|
|Hardness Shore A (Plus)||D-2240||27A||27A|
|Hardness Shore A (Black)||D-2240||61A||61A|
|Hardness Shore A (Gray)||D-2240||75A||75A|
|Tensile Tear Resistance (Plus)||D624||-||20 lb/in|
|Tensile Tear Resistance (Black)||D624||-||21 lb/in|
|Tensile Tear Resistance (Gray)||D624||-||54 lb/in|
All values were taken from the documentation supplied by the manufacturer of this particular material. C.ideas inc. makes no claims to the accuracy of this data, as each individual application may vary. Please contact the manufacturer for any questions relating to specific MSDS information.